Remote board holder for a wells Gardner you 5000, and possibly others
Somewhere along the lines I lost the holder for the remote pot adjustment board for a U 5000 monitor, so I printed my own. I presume that many other remote boards that Wells gardener Makes Will fit in this as well. Supports recommended for underneath the three tabs otherwise you’ll have some stringing to clean up. The provided STL file already has the supports built-in
None | |||
---|---|---|---|
Printer Brand: | Dremel | ||
---|---|---|---|
Printer: | 3D20 | Shop for this item | |
Nozzle Used: | Micro Swiss .4mm Nozzle MK10 All Metal Hotend Upgrade Kit | Shop for this item | |
Rafts? | No | ||
Supports? | No | ||
Infill | 35% | ||
Filiment Choice Color | Inland 1.75mm White PLA PRO (PLA+) White | Shop for this item |
Use a knife to remove supports under the tabs
This design, as well as previous designs, was done in Autodesk’s free 123D design. This is now an abandoned piece of software, that I am still very proficient in. You can download its last revision (2.2.14) here, but understand that the online cloud storage option no longer works.
The .123dx file may contain sketches, solids, or both needed to render the final STL. and is included to ease part modification for your purpose.